Industrial Adhesives

In bonding plastic feathers and nocks onto arrow shafts, fast-tacking 3M™ Scotch-Grip™ Plastic Adhesive 4475 dries quickly to a firm bond. Resists plasticizers, water, and heat up to 200°F (93°C).

With excellent resistance to fuel and oil, 3M™ Scotch-Grip™ Rubber and Gasket Adhesive 847
bonds and seals chemical drum gaskets in place.

Contact Adhesives

Product		Description	Consistency	Colour Dry Film	App. Method	Bonding Range (min)	Overlap Shear Strength (PSI)		Peel Strength (PIW)
Product		Description	Consistency	Colour Dry Film	App. Method	Bonding Range (min)	*75F (24C)*	*180F (82C)*	*75F (24C)*
	826	▪ Fast drying for many plastic films ▪ Resists aromatic & aliphatic fuels, water, oil	Thin Liquid	Amber	Spray, Brush	Up to 45	198	59	27
	1099	▪ Fast drying & heat curable ▪ Resists weathering, water, oil, plasticizer migration, aliphatic fuels ▪ Meets MIL-A-13883B, Type I & MMM-A-189C, Class 2	Medium Liquid	Light Tan	Brush, Flow	Up to 40	1306	643	31
	1099L	▪ Sprayable version of 1099 adhesive	Thin Liquid	Tan	Spray, Brush	Up to 20	1306	643	31
	2262	▪ Quick tack, clear, non-staining ▪ Resists plasticizer migration for bonding many flexible vinyls	Thin Liquid	Clear	Brush, Flow	Up to 20	N/A	N/A	17
	4475	▪ Clear, fast tacking, dries quickly ▪ Resists water, plasticizers detergent, oils & grease	Medium Liquid		Flow	Up to 10			44
	4693	▪ Long tack range ▪ Water & heat resistant bond for many plastics, including polyethylene & polypropylene	Thin Liquid		Spray, Brush	Up to 60			22
	4693H	▪ High viscosity version of 4693	Medium Liquid		Flow, Brush	Up to 60			22
	847	▪ Quick drying & flexible with fuel & oil resistance ▪ Heat & solvent reactivatable ▪ Curable with heat	Medium Liquid	Brown	Flow, Brush	Up to 15	200	9	40
	847L	▪ Lower viscosity version of 847 for spray application	Thin Syrup		Spray, Brush	Up to 20
	847H	▪ Higher viscosity version of 847	Thick Syrup		Flow, Brush	Up to 10
	1300	▪ High immediate strength ▪ Fast-drying & heat resistant for rubber & metal	Medium Liquid	Yellow	Flow, Brush	Up to 12	549	136	52
	1300L	▪ Lower viscosity version of 1300 ▪ Sprayable ▪ Meets Mil Spec MMM-A-121	Thin Liquid	Yellow	Spray, Brush	Up to 8	549	136	52
	2141	▪ Easy brushing ▪ General purpose with excellent water resistance	Medium Liquid	Light Yellow	Flow, Brush	Up to 15	377	68	32
	4799	▪ Brushable paste consistency with low soak-in on porous surfaces ▪ Can bond EPDM rubber	Thin Paste	Black	Brush, Trowel	Up to 15	N/A	N/A	28
	4323	▪ Resists wear, heat and dead load creep	Mastic	Gray	Caulk, Flow, Trowel	Up to 20 minutes			N/A
	4550	▪ Fast tacking ▪ Long bonding range	Medium liquid	Clear/ Trans-lucent	Low Pressure Spray	Up to 60 minutes			23

Note: The technical information & data on these pages should be considered representative or typical only & should not be used for specification purposes.